FT-25 kwamfuta lambar sarrafawa lathe- Mai gabatar da

@ action

Agaji na Firam

@ action

member
QShortcut
Phonon:: MMF:: EffectFactory

13889928820,13923206570
QShortcut

No. 48, Yankin Masana'antu na Banana, Nanhai Lixu West Line, Foshan, lardin Guangdong

Haka

FT-25 kwamfuta lambar sarrafawa lathe

QShortcut

KCharselect unicode block name

@ action

FT-25Computer lambar sarrafawa lathe				Standard kayan haɗi
Kayayyakin inji	Sunan	Bayani	raka'a	Sunan	adadin	raka'a
shaft	Spindle Nose irin	ANSI2-4		Bar ciyar da inji dubawa	1	mutum
	Diamita na ramin shaft	Φ37	mm	Radial wuta wurin zama	1	mutum
	Cylinder irin Coupling	25#	mm	Junction bore wutar lantarki	2	mutum
	Spindle tsakiya zuwa ƙasa tsayi	900	mm	Axial biyu cutter zama	1	mutum
	Spindle tsakiya zuwa gaban ƙofar nesa	350	mm	Yin amfani da kayan aiki mai amfani Φ8, Φ10, Φ12 Φ16, Φ20	kowane 1	mutum
Control tsarin	Spindle motor ikon	3.7	da	ER25 Drill hannu hannu	1	Saitin
	Spindle tushen juyawa gudun	1500	da	yanke wuka seat (junction style)	1	mutum
	Max juyawa na spindle	6000	da	Radial biyu cutter zama (node style)	1	mutum
	Spindle fitarwa torque	17.7	N-m	Halogen aiki haske	1	mutum
	X axis servo motor ikon	0.85	da	wuka zama pad block	5	mutum
	Z axis servo motor ikon	0.85	da	Aiki kammala nuna alama	1	mutum
Machining kewayon	最大床身旋径	Φ400	mm	Foot sauya	1	mutum
	Max aiki workpiece tsawon	150	mm	Akwatin kayan aiki	1	Saitin
	Max aiki workpiece diamita	Φ25	mm	Manufofin aiki	1	Saitin
	Max bar wucewa diamita	Φ25	mm
X / Z axis motsi	X axis tafiya	300	mm
	Z axis tafiya	150	mm	Kayan haɗi na musamman
	X / Z axis sauri motsi kudi	30	m / min	Sunan	adadin	raka'a
Machine daidaito	X / Z axis maimaita daidaito	±0.003	mm	FANUC Oi mate TD	1	rukuni
Machine daidaito	X / Z axis matsayi daidaito	0.005	mm	High matsin lamba sanyaya ruwa famfo	1	mutum
Cutting kawar	yankan ruwa tank iya	70	lita	Bar kayan abinci Injin	1	rukuni
Cutting kawar	yankan ruwa matsin lamba	2.8	bar	Iron chip mai jigilar kayan aiki	1	Taiwan
Tower	Yawan wuka (wuka hasumiya)	7	ramin
	Kayan aiki Handle	□16	mm
	Boring kayan aiki seat Specifications	Φ25	mm
girman	tsawon × fadi × tsayi	1380×1250×1400	mm
	nauyi	1600	kilo
	Yankin da aka rufe	1.75 (ciki har da cutter)	mita

CNC FT-25

Tsarin gaba ɗaya

Cikakken inji castings amfani da high quality Mihanna cast baƙin ƙarfe da kuma kawar da damuwa ta hanyar annealing magani. Kayan aiki na inji yana amfani da 30 ° oblique gado tsari, ƙara inji rigidity, kyakkyawan kwanciyar hankali, gado nauyi da kuma tsari kauri isa su jure yankan kaya, gado ruwa gudu shugabanci tsari zane, ruwa leakage sauka zuwa mafi ƙarancin, da kuma chipping m.

CNC FT-25

Babban daidaitoHigh rigidity shaft

The shaft ya yi amfani da high daidaito NSK P4 matakin inclined kusurwa ball bearings, ta hanyar injiniya lissafi bincike samun ingantaccen span saiti, da kuma ambata high-tech lubrication fasaha da kuma high rigidity sleeve tsarin nuna mafi kyau kwanciyar hankali, tabbatar da iyakar axial rigidity, radial rigidity da kuma aiki daidaito.

CNC FT-25

High rigidity layi rail

X-axis, Z-axis amfani da high rigidity layi slide rail, da keɓaɓɓun ingantaccen span tsakanin hanyoyin, low juriya, high rigidity, motsi gudun iya zuwa 30 M / min, kara aiki amfani, rage aiki lokaci.

High daidaito jagora dunƙule

X shaft, Z shaft amfani da high daidaito C3 gila matakin ball jagoranci dunguwa, biyu gefen da aka kafa karshen da aka zaɓi Japan NSK haɗin daidaitaccen kusurwa ball bearing taimakon goyon baya, biyu shaft jagoranci dunguwa pre-drag zane, tabbatar da daidaito na drive inji, tare da laser gyara biyu shaft ball jagoranci dunguwa sashe kuskure kudi don daidaita biyu shafts da matsayi daidaito, da kuma biyu karshen zagaye daidaitacce na zagaye, daidai sarrafa reverse spacing seams samar da zagaye arc yankan, inganta inji aiki daidaito.

CNC FT-25

FANUCMai kula (Zaɓuɓɓuka）

Mai sarrafawa yana amfani da tsarin sarrafa FANUC na Japan mai ƙarfin kwanciyar hankali, mafi girman gudun sarrafawa, da kuma kunshin aiki mai ƙarfi don yin aiki mafi kwanciyar hankali.

CNC FT-25

New tsara mai kula

Mai sarrafawa yana amfani da babban kwanciyar hankali na Taiwan SYNTEC POOTE tare da 8 "LCD nuni aiki.

CNC FT-25

Iron chipper na'ura（Zaɓuɓɓuka）

Aiki tare da kayan aiki, zaɓi kayan aiki na allon nau'in kawar da ƙwayoyi, kulawa mai sauki, inganci kawar da ƙwayoyin ƙarfe, kiyaye tebur mai tsabta, ƙara tsabtace mai sauki.

CNC FT-25

Spindle Kula

Don ci gaba da babban adadin sarrafa rods, tare da spindle clips, plus rod conveyor, samar da atomatik sauri positioning, rage aiki canji lokaci, inganta atomatik samar da inganci.

CNC FT-25

wukaTsarin

Side-to-side wuka, al'ada za a iya tsara wuka 6, kuma bisa ga yanayin aiki, kara adadin wuka da ya dace, aiki mai sauki, sauki ga wuka, babu buƙatar canza lokacin wuka, babban aikin aiki.

CNC FT-25

Laser daidaitawa

Tare da high daidaito gani laser kayan aiki, don inji mai jagoranci dunƙule yin dunƙule nisa diyya, don tabbatar da inji a kowane wuri na mataki daidaito zai iya daidaito, don karfafa daidaito kwanciyar hankali na aiki sassa.

CNC FT-25

Babban aikiTsarin kwamfuta

Kayan aikin lantarki na akwatin waya, duk sun dace da ƙa'idodin tsaro na kayan aikin lantarki. Tabbatar da sarrafa tsarin aiki ne ba tare da waje tsangwama.

CNC FT-25

kayan aikiMai karɓar akwati(Kayan aiki na musamman)

Bayan karɓar aikin aiki ta hanyar mai karɓa, a cikin akwatin mai karɓa don sauƙaƙe aiki Cire aikin aiki, akwatin mai karɓa yana buƙatar mai tattara aikin aiki

QNetworkAccessFileBackend

QShortcut
QShortcut
QShortcut
Email
Dakata
@ action
@ action